Ahmedabad, Gujarat
GST No. 24AAUCS7325P1ZH
Call 08048607552 75% Response Rate
We take pride in being the first company in India to have designed Crash Bollards which has been physically tested in HORIBA MIRA, UK according to new IWA 14:2013 std. Our bollards have been impact tested with a 7.2ton truck @ 48kmph (K4) and 7.2ton truck@ 80kmph(K12).
India’s premier R&D institute, Automotive Research Association of India, Pune have further conducted simulation test for the above tests and that of 7.2 ton truck @ 64kmph (K8) wherein we have achieved zero static penetration.
Note : We are committed to integrity and genuinity. If you may need any clarification or further details on the technical documentation please feel free to contact us directly at info@swarajsecutech.com
Product Brochure
Cylinder Length | 900mm |
Cylinder Diameter | 223mm |
Rating | K4/IWA 14-12013 Bollard V/7200 [N2A] 48/90/0.1 (7.2 Ton Truck Impacted At 48 km) |
Illumination | Red Led/ Reflective Bands |
Corrosion Resistance | Yes |
Place Of Origin | Ahmedabad |
Brand | Swaraj Secutech |
Operating Temperature | -20c To +60 C |
Hydraulic Drive Unit | 420 V (Ac), 50 Hz |
Protection Class | IP 66-68 (IP Enclosure customisable according to the requirement) |
Duty Cycle | 100% |
Manual Lowering Operations | Available |
Model No. | S4 |
Cylinder Material | High Tensile Carbon Steel |
Rising Time (Emergency) | 1-3 Seconds (Customisable& Optional) |
Rising Lowering Time (Normal) | 3 Sec. |
Total Weight | 200 KG (Including HPU); 250 KG (Including HPU & concrete block) |
Swaraj Secutech presents India''s first manufactured and physically crash tested indigenously designed bollard. Our bollards have been impact tested by Horiba, MIRA. U.K. wherein the bollard was hit at 48 km/h by a fully laden 7.2-ton truck and achieved a penetration of only 0.1 m.
The bollard has been manufactured keeping in mind the corrosive nature of the tropical Indian climate. All parts of bollards are galvanised to prevent corrosion and smooth functioning even when submerged in water. To give a fine balance between aesthetics and security, all bollards come with an aesthetically pleasing stainless steel sleeve which easily merges with the environment.
Our bollards are fast and are ideal for infrastructure which has least depth to the point of impact and at the same time requiring continuous operation.
With Spare kit a part of our standard supply, after sales service is always our priority.
SAFETY:
Safety is most important to us and we provide dual safety mechanism:
Safety against vehicle: loop detector
Safety against human traffic: photo sensor
CONTROL UNIT
Plc based control unit which can be tailor made to your use and can be integrated to all access control devices.
View Complete details
Product Brochure
Drive Unit | Hydraulic (S4-H),Pneumatic (S4-P) |
Illumination | Red Led/ Reflective Bands |
Operating Temperature | -20 C To +60 C |
Manual Lowering Operations | Available |
Model No. | S8 |
Cylinder Diameter | 275mm |
Cylinder Length | 900mm |
Rating | K8/PAS 68/IWA142013 (6.8 TON TRUCK IMPACTED @ 64 KM/H) |
Cylinder Material | High Tensile Carbon Steel |
Rising Time (Emergency) | 1.2 Sec.1-3 Sec (Customisable & Optional) |
Hydraulic Drive Unit | 420 V (Ac),50 Hz |
Protection Class | IP 66-68 (IP enclosure customisable according to requirement) |
Swaraj Secutech presents India''s first crash simulated and indigenously designed bollard. Our bollards have been impact tested by India’s premier R&D institute ARAI, Pune wherein the bollard was hit at 64 km/h by a fully laden 6.8-ton truck and on each occasion, simulated a complete dead stop of the vehicle.
The bollard has been manufactured keeping in mind the corrosive nature of the tropical Indian climate. All parts of bollards are galvanised to prevent corrosion and smooth functioning even when submerged in water. To give a fine balance between aesthetics and security, all bollards come with an aesthetically pleasing stainless steel sleeve which easily merges with the environment.
Our bollards are fast and are ideal for infrastructure which has least depth to the point of impact and at the same time requiring continuous operation.
With Spare kit a part of our standard supply, after sales service is always our priority.
SAFETY:
Safety is most important to us and we provide dual safety mechanism:
Safety against vehicle: loop detector
Safety against human traffic: photo sensor
View Complete details
Product Brochure
Place Of Origin | India |
Brand | Swaraj Secutech |
Drive Unit | Hydraulic (S4-H), Pneumatic (S4-P) |
Protection Class | IP 66-68 (IP Enclosure customisable according to the requirement) |
Duty Cycle | 100% |
Rating | K4/IWA 14-12013 Bollard V/7200 [N2A] 48/90/0.1 (6.8 Ton Truck Impacted At 48 Km) |
Hydraulic Drive Unit | 420 V (Ac), 50 Hz |
Model No. | S4 |
Cylinder Material | High Tensile Carbon Steel |
Cylinder Diameter | 223mm |
Rising Lowering Time (Normal) | 3 sec |
Swaraj Secutech presents India's first manufactured and physically crash tested indigenously designed bollard. Our bollards have been impact tested by Horiba, MIRA. U.K. wherein the bollard was hit at 48 km/h by a fully laden 7.2-ton truck and achieved a penetration of only 0.1 m.
The bollard has been manufactured keeping in mind the corrosive nature of the tropical Indian climate. All parts of bollards are galvanised to prevent corrosion and smooth functioning even when submerged in water. To give a fine balance between aesthetics and security, all bollards come with an aesthetically pleasing stainless steel sleeve which easily merges with the environment.
Our bollards are fast and are ideal for infrastructure which has least depth to the point of impact and at the same time requiring continuous operation.
With Spare kit a part of our standard supply, after sales service is always our priority.
SAFETY:
Safety is most important to us and we provide dual safety mechanism:
Safety against vehicle: loop detector
Safety against human traffic: photo sensor
CONTROL UNIT
Plc based control unit which can be tailor made to your use and can be integrated to all access control devices.
View Complete details
Operating Temperature | -20 C To +60 C |
Illumination | Red Led/ Reflective Bands |
Rating | K4/IWA 14-12013 Bollard V/7200 [N2A] 48/90/0.1 (6.8 Ton Truck Impacted At 48 Km) |
Cylinder Length | 900mm |
Hydraulic Drive Unit | 420 V (Ac), 50 Hz |
IP Rating | IP 66-68 (IP Enclosure customisable according to the requirement) |
Manual Lowering Operations | Available |
Cylinder Diameter | 223mm |
Cylinder Material | High Tensile Carbon Steel |
Total Weight | 200 KG (Including HPU); 250 KG (Including HPU & concrete block) |
Swaraj Secutech presents India's first manufactured and physically crash tested indigenously designed bollard. Our bollards have been impact tested by Horiba, MIRA. U.K. wherein the bollard was hit at 48 km/h by a fully laden 7.2-ton truck and achieved a penetration of only 0.1 m.
The bollard has been manufactured keeping in mind the corrosive nature of the tropical Indian climate. All parts of bollards are galvanised to prevent corrosion and smooth functioning even when submerged in water. To give a fine balance between aesthetics and security, all bollards come with an aesthetically pleasing stainless steel sleeve which easily merges with the environment.
Our bollards are fast and are ideal for infrastructure which has least depth to the point of impact and at the same time requiring continuous operation.
With Spare kit a part of our standard supply, after sales service is always our priority.
SAFETY:
Safety is most important to us and we provide dual safety mechanism:
Safety against vehicle: loop detector
Safety against human traffic: photo sensor
View Complete details
Product Brochure
Illumination | Red Led/ Reflective Bands |
Hydraulic Drive Unit | 420 V (Ac),50 Hz |
Rating | K4/IWA 14-12013 Bollard V/7200 [N2A] 48/90/0.1 (6.8 Ton Truck Impacted At 48 Km) |
Model No. | S4 |
Protection Class | IP 66-68 (IP Enclosure customisable according to the requirement) |
Cylinder Diameter | 223mm |
Cylinder Length | 900mm |
Cylinder Material | High Tensile Carbon Steel |
Rising Lowering Time (Normal) | 3 sec |
Unique Mechanism | In Built Tie Rod Mechanism |
Total Weight | 200 KG (Including HPU); 250 KG (Including HPU & concrete block) |
Operating Temperature | -20 to +60 C |
Swaraj Secutech presents India's first manufactured and physically crash tested indigenously designed bollard. Our bollards have been impact tested by Horiba, MIRA. U.K. wherein the bollard was hit at 48 km/h by a fully laden 7.2-ton truck and achieved a penetration of only 0.1 m.
The bollard has been manufactured keeping in mind the corrosive nature of the tropical Indian climate. All parts of bollards are galvanised to prevent corrosion and smooth functioning even when submerged in water. To give a fine balance between aesthetics and security, all bollards come with an aesthetically pleasing stainless steel sleeve which easily merges with the environment.
Our bollards are fast and are ideal for infrastructure which has least depth to the point of impact and at the same time requiring continuous operation.
With Spare kit a part of our standard supply, after sales service is always our priority.
SAFETY:
Safety is most important to us and we provide dual safety mechanism:
Safety against vehicle: loop detector
Safety against human traffic: photo sensor
View Complete details